INTEGRASI PENDEKATAN STATISTICAL PROCESS CONTROL (SPC) DAN KAIZEN DALAM PENGENDALIAN KUALITAS PADA PRODUK SHEET FILM

Authors

  • Aat Sevtian Hadi Universitas Bina Bangsa
  • Sherin Ramadhania Universitas Bina Bangsa
  • Mislan Mislan Universitas Bina Bangsa

DOI:

https://doi.org/10.46306/ncabet.v3i1.131

Keywords:

Quality Control, Statistical Process Control (SPC), Kaizen

Abstract

PT XYZ is a company that produces Sheet Film located in Cilegon. The problem that occurs at PT XYZ is related to the issue of quality control where the number of defects is high in the product so that many complaints are made by buyers. The purpose of this research is to identify the types of defects that exist in the product and determine the factors that cause product defects and analyze the efforts that need to be made to reduce defects in Sheet Film products. Statistical Process Control is a technique used to ensure an operating process runs according to standards. This technique is a process used to monitor standards, make measurements, and take corrective actions while a product is being manufactured. The tools in measuring quality control used are Check Sheet, Histogram, Flowchart, Control map, Pareto diagram, Scattered Diagram, Cause-Effect Diagram and proposed quality improvement efforts with the Kaizen method. The results of the data processing carried out found that the highest type of defect was the ILK Defect type of 608 Roll, then the Thickness defect type of 109 Roll and the Scratch defect type of 98 Roll. The conclusion of this study is that proposals were obtained to improve several sectors both in terms of Humans, Machines, Methods, Materials, and also the environment

References

Ekoanindiyo, F. A. (2013). Pengendalian Kualitas Menggunakan Pendekatan Kaizen. Dinamika Teknik, VII(2), 1–10.

Elyas, R., & Handayani, W. (2020). Statistical Process Control (Spc) Untuk Pengendalian Kualitas Produk Mebel Di Ud. Ihtiar Jaya. Bisma: Jurnal Manajemen, 6(1), 50. https://doi.org/10.23887/bjm.v6i1.24415

Hanum, B. (2022). Quality Control Analysis of Metal Baseplate Finishing process using Statistical Process Control (SPC) and Failure Mode and Effect Analysis (FMEA): A Case Study of Indonesia Company. International Journal of Scientific and Academic Research, 02(06), 09–18. https://doi.org/10.54756/ijsar.2022.v2.i6.2

Kamal, S., & Sugiyono. (2019). Analisis Pengendalian Kualitas Produk Kantong Semen menggunakan Metode Seven Tolls (7QC) pada PT. Holcim Indonesia, Tbk. Indikator: Jurnal Ilmiah Manajemen & Bisnis, 3(1), 122–131. https://publikasi.mercubuana.ac.id/index.php/indikator/article/view/5172

Kartika, H. (2013). Analisis pengendalian kualitas produk CPE film dengan metode Statistical Process Control pada PT. MSI. Jurnal Ilmiah Teknik Industri, 1(1), 50–58.

Karyono, O., & Ibrahim, S. (2018). Pembuatan Paper Bag Dengan Menggunakan Seven Quality Control Tools Di Pt . Indocement Tunggal Prakarsa Tbk Pada Line Produksi 1. 9th Industrial Research Workshop and National Seminar. https://doi.org/10.35313/irwns.v9i0.1059

Krisnaningsih, E., Wirawati, S. M., & Febriansyah, Y. (2020). Penerapan Statistical Process Control (SPC) dan Failure Mode Effect Analysis (FMEA) pada Proses Produksi Tisu Wajah. Jurnal Penelitian Dan Aplikasi Sistem & Teknik Industri (PASTI), 14(3), 293–309. http://dx.doi.org/10.22441/pasti.2020.v14i3.007.

Mahaputra, M. S. (2021). Analisis Pengendalian Kualitas Produk Plastik Injeksi dengan Menggunakan Metode Statistical Process Control (SPC) dan Kaizen di CV. Gradient Kota Bandung. Media Nusantara, 18(1), 1–16.

Marriauwaty, D., & Fajrah, N. (2020). Analisis Pengendalian Kualitas Produk Kapasitor di PT XYZ Batam. Journal of Industrial Engineering & Management Research, 1(1b), 43–52.

Napitu, T. H., Harahap, U. N., & Suratman, J. (2022). Pengendalian kualitas produk pulp dengan menggunakan metode Kaizen di PT. Toba Pulp Lestari, Tbk. Jurnal VORTEKS, 3(1), 182–189. https://doi.org/10.54123/vorteks.v3i1.155

Nurhasanah, E. (2018). Analisis Pengendalian Kualitas pada Proses Produksi dengan Diagram Pareto dan Fishbone pada PT Tiga Serangkai Pustaka Mandiri Surakarta.

Purnamawati, N. L. A., Mitariani, N. W. E., & Anggraini, N. P. N. (2020). Pengaruh kualitas pelayanan, kualitas produk dan persepsi harga terhadap minat beli ulang di Bandung Collection Kecamatan Kuta Utara, badung. Values, 1(3).

Radianza, J., & Mashabai, I. (2020). Analisa Pengendalian Kualitas Produksi Dengan Menggunakan Metode Seven Tools Quality Di PT. Borsya Cipta Communica. JITSA Jurnal Industri & Teknologi Samawa, 1(1), 17–21. https://jurnal.uts.ac.id/index.php/jitsa/article/view/583

Setiawan, L., & Alriani, I. (2018). Analisis Pengendalian Proses Produksi dengan Metode Statistical Quality Control pada Pt.Estwind Mandiri Semarang. Jurnal Ekonomi Manajemen Dan Akuntansi, 25(44), 18. https://ejurnal.stiedharmaputra-smg.ac.id/index.php/JEMA/article/viewFile/318/298

Shiyamy, A. F., Rohmat, S., & Sopian, A. (2021). Artikel analisis pengendalian kualitas produk dengan. Jurnal Ilmiah Manajemen, 2(2), 32–45.

Siwi, B. R. (2016). Aplikasi Six Sigma DMAIC dan Kaizen sebagai Metode Pengendalian dan Perbaikan Kualitas Produk PT. Sarandi Karya Nugraha. Industrial Engineering Online Journal, 5(4).

Solihudin, M., & Kusumah, L. H. (2017). ANALISIS PENGENDALIAN KUALITAS PROSES PRODUKSI DENGAN METODE STATISTICAL PROCESS CONTROL ( SPC ) DI PT . SURYA TOTO. 1–8.

Ulkhaq, M. M., Pramono, S. N. W., & Halim, R. (2017). Aplikasi seven tools untuk mengurangi cacat produk pada Mesin Communite di PT. Masscom Graphy, Semarang. Penelitian Dan Aplikasi Sistem Dan Teknik Industri, 11(3), 328346.

Yusuf, M., & Supriyadi, E. (2020). Minimasi Penurunan Defect Pada Produk Meble Berbasis Prolypropylene Untuk Meningkatkan Kualitas Study Kasus: PT. Polymindo Permata. EKOBISMAN-JURNAL EKONOMI BISNIS DAN MANAJEMEN, 4(3), 244–255.

Zahra Dhea Sarwendah, A. (2022). Implementasi Statistical Process Control (SPC) dalamPengendalian Kualitas Kemasan Air Minum Hygio. Prosiding Seminar Nasional Tetamekraf, 1(2), 2022.

Downloads

Published

2024-03-15

How to Cite

Hadi, A. S. ., Ramadhania, S. ., & Mislan, M. (2024). INTEGRASI PENDEKATAN STATISTICAL PROCESS CONTROL (SPC) DAN KAIZEN DALAM PENGENDALIAN KUALITAS PADA PRODUK SHEET FILM. National Conference on Applied Business, Education, &Amp; Technology (NCABET), 3(1), 340–353. https://doi.org/10.46306/ncabet.v3i1.131